Ingersoll-Rand QX Series, Руководство пользователя

Страница: 16 / 28

EN-15 48619852_ed3
EN
2.3.1.10. Gang count
The below screen shows the gang count number of bolts to be fastened per Group, Gang, or Set for Configuration 1.
This can be modified by entering “EDIT MODE”.
2.3.1.11. Save / Ignore Settings
After all the required changes are completed, Press enter to highlight the save settings box on the left. Press the right or
left arrow key to select cancel on the right. Pressing enter a second time causes the tool to leave edit mode.
SAVE SETTINGS
CANCEL SETTINGS
2.3.2. General Settings of the QX Series tool
After display is unlocked with a valid password, pressing “LEFT” key will advance to following settings that can be
modified as required. The settings can be modified by entering “EDIT MODE” and using “UP” or “DOWN” key or “RIGHT”
or “LEFT” key as required.
2.3.2.1. Radio Enable/Disable
This screen allows the user to enable or disable the radio module. The selection on the left disables the radio module
and the selection on the right enables the radio module.
RADIO DISABLED
RADIO ENABLED
RELEASED 18/Apr/2014