Ingersoll-Rand QX Series, Руководство пользователя

Страница: 18 / 28

EN-1 48619852_ed3
EN
2.6. Cycle count
This value shows number of cycles run by the QX Series tool, Since the last time it was changed.
With the tool unlocked, press ‘ENTER” key to edit this screen. Press either the ‘UP’ or ‘DOWN’ key to clear the cycle count.
For this change to be retained a cycle must be run before removing power to the tool. Otherwise, the old cycle count is
restored.
NOTE: After entering the correct password, user has to use the UP arrow button from password settings screen to
move to the cycle count screen.
2.7. Angle
Primary display – Target Angle.
Secondary Display on left - Angle low.
Secondary Display on right - Angle High.
RELEASED 18/Apr/2014