Ingersoll-Rand QX Series, Руководство пользователя

Страница: 3 / 28

48619852_ed3 EN-2
EN
1. Overview of different Menu screens
Power up QX Series tool
RUN SCREEN
Press “UP” key.
Number being used.
Always Press “UP” key to
go to next screen.
Press “ENTER” to enter “EDIT” mode.
Password screen
Current fault
Status screen with shunt
cal, wireless strength and
battery level.
Cycle Count
Target Angle, Low
and High screen.
Target Torque Low
and High screen.
RUN SCREEN
Press “UP” key to
increment the value
Press “DOWN” key to
decrement the value.
Press “ENTER” to select
the changed values.
Press “ESC” to undo and
keep the old values.
After display is unlocked
Press “RIGHT” Key.
Press “UP” key to go to
next screen
Save or Ignore changes. If not on
Save screen, use the up or down
key to scroll to the Save screen.
Press "DOWN" key to scroll
on one by one to get
below editable screens.
After display is unlocked
Press "LEFT" key.
Enable / disable RF module.
Press "RIGHT" key to go to
the RUN SCREEN.
RELEASED 18/Apr/2014