Product name: IPP3x0-X1Txxxxx
9/20
Copyright © 2012 Ingenico
900001663 R11 000 08/1227
All rights reserved
from all persons and must not be co-located or operating with any other antenna or
transmitter.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment
.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from that to which the receiver
is connected.
-
Consult the dealer or an experienced radio/TV technician for help.
3.6.
Main Characteristics
The main technical characteristics of the terminal Ingenico IPP3X0-X1TXXXXX are:
Mass
260 g without cable
Dimensions
169,5 x 83x 42 mm (l x w x h)
Operating conditions
Ambient temperature
from +5°C to +40°C
Max relative humidity
85% at +40°C
Link
USB, Power Over Ethernet or RS232 and
power supply
Storage conditions
Storage temperature
-20°C,+55°C
Max relative humidity
85% at +55°C
