Product name: IPP3x0-X1Txxxxx
7/20
Copyright © 2012 Ingenico
900001663 R11 000 08/1227
All rights reserved
Indoor use symbol.
Limited Power Supply
3.2.
IPP3xx Fixed Installation
If the device is to be used in a situation where it is not possible for the cardholder to pick up
and shield their PIN entry themselves,
the device may be used without PIN shield, but it must be installed in the following manner:
a) The device must be angled at 45 or more, so that oversight of the PIN entry from the rear
of the device is not possible.
b) The device must either be fitted in a swivel stand – so that the customer can position the
device in the best angle to prevent oversight – or the device must be fixed in the best
possible position to prevent oversight if such a generic position exists in the specific
environment to which the device is installed.
c) The device environment must be accompanied with conspicuous notices and educational
material which informs the customer to shield their PIN during PIN entry.
d) The device must be deployed so that oversight from other customers, either in different
payment lanes, or in other areas of the shopping environment, is prevented. This may be
achieved through the placement of the lanes and device , so that the customer is
automatically positioned between the device keypad and other customers. Alternatively, it
may be achieved by the environment in which the device is installed, so that the checkout
itself shields the PIN entry process
.
e) The terminal is exclusively made for indoor use
