infrasave SchwankAir 3500 Series, Инструкции по установке, эксплуатации и обслуживанию

Страница: 66 / 109

66
Stand-by heating
The control can be set in such a way that heat is
immediately available when the door is opened. This is a
percentage of the maximum heat available for this
function. The maximum heat depends on the outdoor
temperature, among other things.
Set the amount of heating that must be available when
the door is opened:

For immediate heat, set a high percentage.

For saving energy, set a low percentage.
Note:
The room temperature control can affect this
amount of available heat.
26. Manual: Door response Set the way in which the unit in manual mode should
respond to the opening and closing of the door:

Direct response.

No response. (The unit always works on the set
fan setting)
31. Maximum strength In order to restrict the sound level, the maximum fan
speed can be limited. This function only has effect on
the automatic mode.
Use of this function can reduce comfort.
32. Deceleration time You can set a post-rotation time for the fan. Here, set
the period of time it should take for the fan to
decelerate from maximum speed to standstill.
33. Boost function If there is a great difference between the desired room
temperature and the actual room temperature, the fan
speed can be increased in order to reach the desired
temperature more quickly.
Set the temperature difference at which the boost
function should be activated and what the fan’s
increase in speed should be.
Use this function if the unit is also used for heating the
room.
If
61. Function of outputs is set to value Risk of
freezing , a contact on that output is also made when
the actual temperature is higher than this setting.
n