
53
During the first start-up the control panel displays
the ‘
installation guide
’. Go through the guide to
make the most necessary settings.
If the installation guide is not displayed, it can be
started via:
menu > Maintenance > Installation
.
If the control panel does not work, or if the display
shows an error message, there is an error: consult
the relevant section.
Note:
The settings of the b-touch control panel can be
copied to another b-touch control panel. See
7.10 Copying the settings.
Note:
After installation, the control panel may possibly
be removed. See 2.8.1 Special points regarding
the control panel
for the conditions.
For all models:
Check that the fans are rotating.
Caution:
If the fans run out of true, it is possible that the
unit is not standing or hanging completely
level. Correct this, if necessary.
For water-heated models type WH
(
-2
)
:
1. Check that the heat exchanger is connected
correctly.
2. Make sure that the central heating system has
been turned on.
3. If the b-touch control panel is implemented:
Make sure that heating is enabled on the control
panel.
4. Feel whether the discharged air stream becomes
warm. This may take some time and is dependent
on the need for heating.
5. Vent the heat exchanger.
6. Adjust the unit on the water side.
n
n
c
Содержание SchwankAir 3500 Series
Страница 108: ...108 ...