EonStor DS B12/B24 Series
45
83
Installing the BBU (1U systems)
1. Remove the screws that secure the top cover of the controller.
2. To install the BBU
(1)
, lower it and match it to the guide-pins
(2)
and secure it
using four screws (shown by the
blue arrows
).
1
2
84
Installing the FBM (1U systems)
Click the FBM into the designated SSD socket on the charger board at a slight angle
(approx.15 degrees). Make sure the label with the product model number on the flash
backup module is facing upward and the gold fingers are fully inserted. Press the
module down. The retention latch on the SSD socket will hold the module in place.
1
2