Infortrend EonStor S12F-G1433, Руководство по установке и аппаратным средствам

Страница: 66 / 124

EonStor S12F-R1432/G1433 Installation and Hardware Reference Manual
Host server 2 (or more via FC switches)
Data path connection Fault-tolerant paths
Host channel bandwidth 1600MB/s
Channel link bypass is provided on external FC switches. Each of the
application servers shown in the diagram is equipped with two HBAs
with FC links via two FC switches to the SFP ports on individual
RAID controllers.
You can refer to the ID tags on the host links to see the related logical
drive mapping and cable links routing paths. Through the topology
diagrammed above, the configuration can withstand a failure of a
single component, e.g., RAID controller, HBA, cable, or FC switch.
3.3 Cabling
Before you start cabling, please do the following:
1. Maintain a configuration plan. In addition to cabling topologies
and list of networking components, the plan can also include
firmware and software maintenance details.
2. Confirm that you have a Fibre Channel cable loops 6-inch or
longer.
3. Ensure proper airflow and keep cables away from ventilation
airflow outlets.
Cabling Steps:
Step 1. Remove the SFP module from its static-protective
package.
Step 2. Remove the dust plug from the SFP transceiver module.
Save the dust plug for future use.
Step 3. Insert the SFP module into the system host ports. The
module will click into place.
Step 5. Remove the two protective caps from the LC-to-LC type
cable. Save the protective caps for future use.
Step 6. Carefully insert the cable into an SFP module that is
already on the system. The cable connector is keyed
and will click into place.
3-10