4-7
EonStor GSe Pro 100 Series Hardware Manual
4. Insert the assembled hard drive and tray to the enclosure with the spring handle open, then close
the spring handle after the drive is fully inserted to the bay.
4.2
Restoring default settings
Before restoring the default settings, you must create a list of existing ID/LUN mapping information.
Restoring your system erases the ID/LUN mapping associations (e.g. logical drive associated with host
ID/LUN).
To restore the default settings:
1. Stop all input/output activities.
2. Save the current configuration using
Export NVRAM
.
3. Turn off the system.
4. Insert a straightened paper clip to the Restore Default button, then press and hold until the Restore
Default LED lights up.
NOTE:
During restoration, the Restore Default LED lights up in
. It lights up in
after the
restoration process is complete.
5. In the firmware, use
Import NVRAM
from reserve space or
Restore NVRAM from files
to restore
your previous settings. ID/LUN mapping configuration is restored after applying your previous
settings.
