2-7
EonStor GSe Pro 100 Series Hardware Manual
2.2.4 Installing a host/expansion board
IMPORTANT!
Ensure that you installed at least four (4) 3.5-inch hard drives in bays 1-4 if you want to
install a host/expansion board.
NOTES:
• A downtime may occur when you install or replace the host/expansion board.
•
To add or replace a host board, the firmware automatically restores the default factory settings of
your system.
To install a host/expansion board:
1. Shut down your system.
2. Facing the rear panel, remove the two screws that secure the host/expansion board’s dummy cover
to the system.
