2-12
Chapter 2: Hardware installation
Connecting to power source
Connect the bundled power cord to the system’s power socket.
Turning on the system
Before turning on the GSe Pro system, you must turn on the expansion enclosures first if your network
configuration consists of multiple arrays.
To turn on the system:
1. Turn on the networking devices.
2. Turn on the JBOD/expansion systems.
3. Press the power button on the front panel.
4. Turn on the application servers.
NOTES:
•
The NAS server operates using DHCP (Dynamic Host Configuration Protocol) when all Ethernet
ports are connected. When DHCP fails to obtain a valid IP address which resulted from the NAS
server’s inability to access the network, you can still log into the NAS server using its default
address 10.10.1.1 of Ethernet port 3.
• For gateway access with static IP address, contact your network administrator.
