4-6
Chapter 4: System maintenance
4.1.3 Replacing the hard drives
WARNING!
• Ensure to have the replacement ready before replacing the hard drive. DO NOT leave the drive tray
open for long periods to prevent disruption of internal airflow.
•
Handle the hard drives with extreme care. Hold them by the edges and avoid touching the circuits
and interface connectors.
To replace the hard drives:
1. Identify the faulty hard drive using the EonOne software.
NOTE:
See section
for the order of the drive bays.
2. When the faulty hard drive is located, push the release button to eject the drive tray (A), wait for 30
seconds for the drive to spin down, then pull out the tray using the spring handle (B).
3. Take out the defective hard drive from the tray, then assemble the hard drive replacement to the
tray.
NOTE:
See section
2.2.3 Installing the hard drives
for more information.
