4-10
Chapter 4: System maintenance
4. Orient and insert the replacement FBM’s notch to the module slot’s guide (A) in a 45° angle, orient
the screw notch on the screw hole (B), then secure the FBM to the board with a screw (C) you
removed in step 3.
5. Install the host board back to the controller.
6. Insert the controller back to the enclosure.
3. Remove the screw that secures the FBM to the controller (A), then remove the FBM from the
module slot (B). Do the same step to the other FBM if you want it replaced.
