Infortrend EonStor GSa 3000 Скачать руководство пользователя страница 15

Страница: 15 / 97

1-2

Chapter 1: Product introduction

Expansion controller and interface

The expansion enclosure is managed by expander controllers that distribute data flow to individual disk

drives and report operating status through a proprietary enclosure service via in-band protocols. The

enclosure, along with other expansion systems, connects to a SAN system and serves as a building

block of a scalable configuration.
For supported protocols, the firmware supports communications with enclosure devices, SAS/SATA disk

drives, and SAN system that features SAS expansion ports.
For physical connection, the SAS interface provides easy cabling routes via mini-SAS connectors. With

the backplane-adapting SAS or SATA drives, the system can support enterprise-class SAS, Near-line

SAS, and cost-effective SATA-II or SATA-III SSDs. This connection is ideal for adding large capacity

storages to a storage pool.

Power supply unit/cooling module

There are two PSU/cooling modules in the system. Each PSU/cooling module is hot-swappable and

is built with a fan to protect the system from overheating while providing constant power. The modular

architecture of the system and easy accessibility to all major components provide you an easy

maintenance.

1.2 Chassis

This section describes the front and rear panels of EonStor GSa 3000 Series’s rugged storage chassis.

The chassis are designed to allow installation to the rack or a cabinet.

1.2.1 Front panel

Number

Part

Description

Drive trays

Each drive tray is hot-swappable and holds a 2.5-inch SSD.

LED panel

LED panel has service, power, cooling fan, thermal, and system

LEDs.

Mute button/

Service LED

This button mutes the alarm while the embedded Service LED notifies

you that the system requires service.

Rackmount

holes

These holes secure the enclosure to the rackmount system with the

mounting screws.

Handles

These handles allow you to push/pull the enclosure to/from the

cabinet installed in the rackmount system.

Содержание EonStor GSa 3000


































































































Результаты поиска

Содержание EonStor GSa 3000

Отзывы:

Похожие инструкции для EonStor GSa 3000

Бренды по названию

Популярные бренды

Infortrend EonStor GSa 3000, Руководство по оборудованию

Результаты поиска

Содержание EonStor GSa 3000

Отзывы:

Похожие инструкции для EonStor GSa 3000

Бренды по названию

Популярные бренды