Infortrend EonStor GSa 3000 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 97

background image

vi

•

Use a slightly moistened paper sheet or cloth for cleaning. Avoid using liquid or sprayed detergent.

•

When replacing components, insert them as gently as possible while assuring full engagement.

Vibration and shock can easily damage hard drives.

•

Only qualified service personnel should open the enclosure.

•

Contact service personnel if any of the following situations occurs:
•  The power cord or plug is damaged.
•  The enclosure has been exposed to moisture.
•  The system has not been working properly.
•  The enclosure was dropped against a hard surface.
•  The enclosure shows obvious signs of breakage.

•

To move the enclosure, more than one person might be necessary due to its weight. Drives should

be removed from the enclosure beforehand.

Important notice

The use of Infortrend certified components is strongly recommended to ensure compatibility, quality, and

normal operation with your Infortrend products. Contact your distributor for a list of Infortrend certified

components (e.g. SFP, SFP+, HBA card, iSCSI cable, FC cable, memory module, etc.).

ESD precautions

•

Handle the modules by their retention screws, ejector levers, or the module’s metal frame/faceplate

only. Avoid touching the PCB boards or connector pins.

•

Use a grounded wrist strap and an anti-static work pad to discharge static electricity when installing

or operating the enclosure.

•

Avoid dust, debris, carpets, plastic, vinyl, and Styrofoam in your work area.

•

Do not remove any module or component from its anti-static bag before installation takes place.

•

Drives must not be stacked on top of each other without their protective drive trays. Even when

drives are fixed in the drive trays, contacting the exposed PCB or rear-side interface may damage

the drives.

About this manual

The manual introduces hardware components of EonStor GSa 3000 storage system and expansion

enclosures. It also describes how to install, monitor, and maintain them.
•

For non-serviceable components, contact our support sites.

•

Firmware operation: Consult the Firmware User Manual on the CD-ROM.

•

EonOne software: Consult the EonOne User Manual on the CD-ROM.

«
...
4
5
6
7
8
...
»

Содержание EonStor GSa 3000


































































































Отзывы:

Нет отзывов

Похожие инструкции для EonStor GSa 3000

Бренд: WAGO Страницы: 2

Бренд: Rocsecure Страницы: 10

Бренд: TP-Link Страницы: 7

Бренд: Cowfish Technologies Страницы: 38

Бренд: B&B Страницы: 55

Бренд: BEC Страницы: 159

Бренд: QNAP Страницы: 63

SUPERSERVER 8045C-3R

Бренд: Supermicro Страницы: 118

Бренд: Matrix Switch Corporation Страницы: 60

Бренд: Fujitsu Siemens Computers Страницы: 68

TGXPS-1080-M12-MV Series

Бренд: ORiNG Страницы: 2

Бренд: Paradyne Страницы: 74

Бренд: HIKVISION Страницы: 13

Бренд: ioSafe Страницы: 4

Бренд: NetMedia Страницы: 2

LITTLE DISK USB 2.0

Бренд: LaCie Страницы: 23

EdgePoint EP-R8

Бренд: Ubiquiti Страницы: 22

Бренд: TP-Link Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды