EonStor F16F-R/S4031 Installation and Hardware Reference Manual
Figure 5-1: Removing Screws from underneath Ejection Levers
Step 3.
Remove the controller module
by pressing down the two
(2) levers at the back of the controller module. The
controller module will automatically be eased out of the
controller module bay. (See
Figure 5-2
)
Figure 5-2: Pressing down the Ejection Levels
Step 4.
Gently pull the controller module out of the subsystem.
Use another hand its weight if the subsystem is mounted in
a rack cabinet. Place the controller module on a clean
surface. (See
Figure 5-3
)
5-4
Replacing
Controller Module Components
