Chapter 3: Subsystem Connection
Step 7.
Press the up or down arrow keys to
Reset Controller
option, then press
[ENTER]
.
Step 8.
Press
[ENTER]
again to confirm. The controller will now
reset.
NOTE:
Questions related to Hyper Terminal program such as how to setup the
program, please refer to firmware Operation Manual that came with the
product CD in your subsystem package.
Via RAIDWatch Manager
Step 1.
Open a RAIDWatch manager session and log in with an
administrator password to access the
Configuration
category.
Step 2.
On the navigation tree panel on the left of the RAIDWatch
screen, open the
Configuration
category and click on the
Channel
option. (See
Figure 3-6
)
Figure 3-6: RAIDWatch Navigation Tree
Step 3.
When the
Channel
window displays, select a channel that
you wish to change its mode.
Step 4.
Click on the
Parameters
tab on the right of the screen to
open the
Parameters
page.
Step 5.
In the
Channel Mode
drag-down menu, select a channel
mode.
Configuration Options
3-7
