inform PDSP 33010, Инструкция по установке и эксплуатации

Страница: 36 / 60

31
6.1.3. Liquid Crystal Display (LCD) and User Menu
LCD provides detailed information about device status, alarms and measurements. It also enables
the operator to manage the UPS. All information, commands and configuration parameters are
given in a menu, which has the following structure:
LCD consists of two lines and has the following structure:
“OPERATING MODE” or “VSECFLR”
“MENU or PARAMETER NAME”
If there is no voltage on the output, VSECFLR message is displayed on the upper line.
Operation mode parameter is one of the notations below:
OPERATING MODE NOTATIONS
NORMAL Normal mode
BYPASS Bypass mode
BATT Battery mode
Menu and parameter descriptions are given below:
ALARMS MENU
ALR = “XXXXXXXXXXXX”
12 digit service codes.
Note these numbers before referring technical service.
ST = “XXXX-XXXXXXXX”