33
4.4.2 Exposure Settings
Figure 4-23 Exposure Settings
Exposure set, auto aperture, ICR control, ICR switch time, scene, AGC, shutter
speed and manual AGC can also be set in this interface.
Exposure Set: Manual, Scene and Shutter priority. In the Scene mode, indoor or
outdoor can be selected and AGC can be set (maximum 64X); if set to manual
34
mode, shutter speed can be set from 1/25s to 1/8000s and manual AGC can be
set to 1X to 64X, yet the scene and AGC are nonadjustable; if set to shutter
priority mode, the shutter speed and AGC can be set.
Auto Aperture: to enable or disable auto iris.
ICR Control: Auto mode, Night or Day. In Auto mode, the camera can
automatically control the day/night switching; in Day mode, videos are in color
mode; in Night mode, videos are in black/white mode.
AE target: set AE target level. It can adjust video brightness via AE target setup.
4.4.3 Effect Settings
In the Effect Settings interface, users can adjust the brightness, sharpness, hue,
contrast, saturation and 3D denoise in two ways: General or Mode, as shown in
the figure below:
Figure 4-24 Effect Set - General
35
Drag the sliding block to adjust the brightness, sharpness, hue, contrast,
saturation and 3D denoise.
Figure 4-25 Effect Set - Mode
The camera supports 6 video effect modes. Users can set and save Name, ICR
36
control mode and Scene parameters for each mode. Click “Factoryset” to
restore it to default settings.
The camera provides 7 Scene modes: Normal, Anti Fog, Motion, Entrance,
Natrium, Sharpen, USrMode. Each mode matches with a group of parameters, such
as
brightness, sharpness, hue, contrast, saturation and 3D denoise.
In the Mode call, users can set effect mode call status and call period.
4.4.4 White Balance Settings
Figure 4-26 White Balance Settings
The camera has rich white balance modes, including Auto, Manual,
Incandescent light, Cool white fluorescent light, Sun light, Cloudy and Natrium
light. If set to manual mode, you can set the red gain and blue gain.
