Infinova V6202-TA Series Скачать руководство пользователя страница 1

 

 

INSTRUCTION MANUAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 

V6202-TA Series 

HD 1MP and 2MP Low Light IP Camera 

 

 

Notice 

 

Copyright Statement

 

This manual may not be reproduced in any form or by any means to create any 
derivative such as translation, transformation, or adaptation without the prior 
written permission of Infinova. 
Infinova reserves the right to change this manual and the specifications without 
prior notice. The most recent product specifications and user documentation for 
all Infinova products are available on our web site www.infinova.com. 

 

Trademarks

 

Infinova

® 

is a trademark of Infinova. 

 
All other trademarks that may appear belong to their respective proprietors. 

 

FCC Warning

 

The V6202-TA series HD 1MP and 2MP low light IP cameras comply with the 
FCC rules. 
 
Operation is subject to the following two conditions: 

 

This device will not cause harmful interference. 

 

This device must accept any interference received, including interference 
that may cause undesired operations. 

 
The V6202-TA series HD 1MP and 2MP low light IP cameras have been tested 
and found to comply with the limits for a Class A digital device, pursuant to the 
FCC rules. With these rules and regulations being obeyed to maintain the good 
working condition of device, the operation is not supposed to be affected by 
external interruptions under certain circumstances. This device is 
electromagnetic, so all the installation and application processing along the 
device has to follow strictly to the manual or it may hamper the 
telecommunication around. Meanwhile, there is no guarantee that interference 
will not occur in a certain particular installation situation. 

 

 

Read this manual carefully before installation. This manual 
should be saved for future use.   

 
 

Important Safety Instructions and Warnings: 
 

 

Electronic devices must be kept away from water, fire or high magnetic 
radiation. 

 

Clean with a dry cloth. 

 

Provide adequate ventilation. 

 

Unplug the power supply when the device is not to be used for an extended 
period of time. 

 

Only use components and parts recommended by manufacturer. 

 

Position power source and related wires to assure to be kept away from 
ground and entrance. 

 

Refer to qualified personnel for all service matters. 

 

Save product packaging to ensure availability of proper shipping containers 
for future transportation. 

 
 
 

 
Indicate that the un-insulated components within the product may carry a 

voltage harmful to humans.   

 
Indicate operations that should be conducted in strict compliance with 

instructions and guidelines contained in this manual. 
 

 
Warning: To avoid risk of fire and electric shock, keep the product away 
from rain and moisture!

 

 

 

 

 

CONTENTS

 

 

Chapter I System Introduction ................................................................ 1

 

1.1 Product Description............................................................................... 1 
1.2 Product Features.................................................................................... 1 
1.3 System Requirement ............................................................................. 2 
1.4 Product Model ....................................................................................... 3 
1.5 Specifications ........................................................................................ 3 
1.6 Notice .................................................................................................... 5 

Chapter II Installation and PORT INTRODUCTION ........................... 7

 

2.1 Installation Precautions ......................................................................... 7 
2.2 Back Panel and Control Parts ................................................................ 7 
2.3 Dimensions ........................................................................................... 9 
2.4 Installation of Camera ........................................................................... 9 

Chapter III IE Browser Settings ............................................................. 11

 

3.1 Equipment Connection ........................................................................ 11 
3.2 Software Installation ........................................................................... 11 

Chapter IV Basic Function Operation ................................................... 14

 

4.1 Live View ............................................................................................ 14 
4.2 System ................................................................................................ 17 
4.3 Network Settings ................................................................................. 23 
4.4 Camera Settings .................................................................................. 32 
4.5 Audio & Video Settings ...................................................................... 39 
4.6 PTZ Functions ..................................................................................... 48 
4.7 Alarm Settings ..................................................................................... 49 
4.8 Record Management ........................................................................... 51 
4.9 Account Settings ................................................................................. 55 
4.10 System Log ....................................................................................... 57 

Appendix I Magnetic Ring Filter Instruction ....................................... 59

 

Appendix II Questions & Solutions ....................................................... 60

 

Appendix III Cable Diameter Calculation and Lightning &             
Surge Protection ...................................................................................... 61

 

Содержание V6202-TA Series


















Отзывы: