Infinity 480HD, Инструкция для пользователя, установка и обслуживание

Страница: 46 / 64

P a g e | 45
LT 7602 Issue No2 (07/17)
480 HD INSTALLATION INSTRUCTIONS
Fuel Bed Layout.
Fuel bed layout should be fitted using the guidance stipulated on pages 11-27 of the User
Instruction section.
Fit Glass Panel.
Due to transit protection, the glass panel is packed with a protective sleeve within the
packed appliance. Special care should be taken when removing the glass panel from the
packing. The top fixing is attacked to the fire box via 2 off M4 fixing nuts. Remove the nuts
and remove the top fixing bracket. (Please see fig 8 within the user instruction section).
Locate the glass panel within the bottom retaining slot and push back against the seals.
(Please see Fig 11).
Position the top fixing bracket over the top edge of the glass panel and slide over the two
M4 studs.
Using the two M4 nuts previously removed. Tighten the top glass fixing using the nut runner
provided with the appliance being careful not to over tighten the glass as this will cause
breakages.
Glass panel
Glass panel bottom
location slot