Infinity 480HD, Инструкция для пользователя, установка и обслуживание

Страница: 7 / 64

P a g e | 6
LT 7602 Issue No2 (07/17)
480 HD USERS INSTRUCTIONS
Flame height adjustment
Once the fire has been started the flame height can be decreased by moving your finger
clock wise or decreased moving your finger anti-clock wise using the selector wheel. Once
the desired flame level is set, remove your finger from the selector wheel to transmit your
selection to the receiver. Six flame levels and a pilot setting are selectable. Press
whilst
the display is active to display the current flame level.
Turn off (shut down)
To turn the appliance off, press and hold down until the progress bar has completed. If
the is released before the progress bar has completed the operation will cancel.
Mode select
With the fire running on manual operation you can access three further “modes”. Press
for “mode”. Use the selection wheel to cycle through the three options, “Auto”, “Sleep” and
“Light”. Press
to select “Auto” or “Sleep”
Sleep:- Use the selector wheel to choose from the available time range of 5 minutes to 1 hour
30 minutes. Once the desired countdown time has expired the appliance will turn off. By
pressing the
button during the countdown will cancel the countdown timer if required.
Note: The handset contains a sensitive temperature measurement device. To achieve the best
thermostatic efficiency do not place the handset near the heat source, avoid covering, direct sunlight
or near a draft or open window etc. Place the handset at a midpoint in the room or area being
heated. Allow 5-10 minutes for the handset to stabilize if subjected to extremes of temperature.