Inficon Contura S400, Перевод оригинальной инструкции по эксплуатации

Страница: 59 / 68

INFICON Operate leak detector via web browser (LAN) | 9
Contura® S400-Operating-instructions-jina91en1-09-(2001) 59 / 68
2
Setting the LAN connection in the PC or Tablet [
}
59]
9.2 Setting the LAN connection in the PC or Tablet
LAN connection - quick start
If you have performed the steps described here once, it is sufficient to enter the IP
address for many devices in case of repetition.
ü
The PC is connected to the same network as the leak detector.
ü
A LAN setting has been set up in the configuration of the leak detector, see also
“Configure the LAN connection of the leak detector [
}
58]“.
ü
You have noted down the IP address of the leak detector. It can be found in the
leak detector under "Information > Device > Network".
ü Java Script is enabled in the web browser. We recommend using a current version
of the web browser Chrome™, Firefox® or Safari®.
► To access the leak tester from the PC or tablet web browser, enter the IP address
of the leak detector as follows:
http://<IP address>
ð The current active user interface of the leak detector is called.
ð The same functionality is available on the PC or Tablet as on the touchscreen
of the leak detector.
9.3 Allow client access
ü
Supervisor - rights
1
> Network > Client Access
2
To allow the leak detector to be operated by PC or Tablet, activate the "Client
Access" option.
ð If the option "Client Access" is not activated, the leak detector cannot be
operated via PC or Tablet. No settings can then be changed.
3
Save .
Display of all connected clients
ü
The network connection between the leak detector and one or more PCs or Tablets
has been established, see “Setting the LAN connection in the PC or Tablet [ } 59]”.
► > Network > Connected clients