Industrial Scientific Ventis 17154524-1, Полевой руководство

Страница: 11 / 17

7
Hardware overview
Feature Feature Part number
Power-on and -off button Visual alarm (pump)
—
Inlet cap and tubing nipple 17129909
Audible alarm (with filter)
90dB (typical)
17154581-5 (filter)
Water barrier (inside inlet
barrel; not shown)
17152395
Power status indicator
Battery status indicator and
battery charge indicator
—
Door latch —
Visual alarm (instrument) Door 17157329
Exhaust with
exhaust filter
17154853-5 (filter)
Wrist strap
(not shown) 17128737
Door latch closed Door latch open Pump cradle
NOTE: If any ordered item is missing or appears to have been damaged, contact a local distributor of ISC products or ISC (See” Contact Information”).
— indicates part is not field replaceable. See “Contact Information” to locate an ISC Service Center.
Setup, Operation, and Service
Pump setup
WARNING: This task must be completed in an area known to be nonhazardous.
1. Attach the battery to the upper portion of the pump case
back; the battery contacts align with the top of the
pump. Tighten the battery’s four captive screws to a
torque setting of .39 Newton-meters (55 ounce-inch).
2. To attach the wrist strap to the pump: thread the shorter
strap loop through the pass-through on the back of the
pump. Thread the longer strap loop through the shorter
loop, pull it to tighten.