background image

12 

Warranty 

Industrial Scientific Corporation's Ventis™ Slide-on Pumps are warranted to be free from defects in material 

and workmanship for a period of two years after purchase. This warranty includes the pump and the battery 

pack as shipped with the Ventis™ Slide-on Pump.  

 

Filters are warranted to be free from defects in material and workmanship for 18 months from date of 

shipment, or one year from date of first use, whichever occurs first, except where otherwise stated in writing 

in Industrial Scientific literature.   

Limitation of Liability 

THE WARRANTY SET FORTH ABOVE IS STRICTLY LIMITED TO ITS TERMS AND IS IN LIEU OF ALL 

OTHER WARRANTIES, GUARANTEES, EXPRESS OR IMPLIED, ARISING BY OPERATION OF LAW, 

COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE. INDUSTRIAL SCIENTIFIC MAKES NO 

OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE 

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. 
SHOULD THE PRODUCT FAIL TO CONFORM TO THE ABOVE WARRANTY, BUYER’S ONLY REMEDY 

AND INDUSTRIAL SCIENTIFIC’S ONLY OBLIGATION SHALL BE, AT INDUSTRIAL SCIENTIFIC’S SOLE 

OPTION, REPLACEMENT OR REPAIR OF SUCH NON-CONFORMING GOODS OR REFUND OF THE 

ORIGINAL PURCHASE PRICE OF THE NONCONFORMING GOODS. 
IN NO EVENT WILL INDUSTRIAL SCIENTIFIC BE LIABLE FOR ANY OTHER SPECIAL, INCIDENTAL, 

CONSEQUENTIAL, PUNITIVE OR OTHER SIMILAR DAMAGES, INCLUDING LOSS OF PROFIT OR LOSS 

OF USE, ARISING OUT OF THE SALE, MANUFACTURE OR USE OF ANY PRODUCTS SOLD 

HEREUNDER WHETHER SUCH CLAIM IS PLEADED IN CONTRACT OR IN TORT, INCLUDING STRICT 

LIABILITY IN TORT AND WHETHER INDUSTRIAL SCIENTIFIC HAS BEEN ADVISED OF THE POTENTIAL 

FOR SUCH DAMAGES.

  

Industrial Scientific’s total liability hereunder from any cause whatsoever (except 

liability from personal injury caused by Industrial Scientific’s negligence), whether arising under contract, 

warranty, tort (including negligence), strict liability, products liability or any other theory of liability, will be 

limited to the lesser of Buyer’s actual damages or the price paid to Industrial Scientific for the Products that are 

the subject of Buyer’s claim.  All claims against Industrial Scientific must be brought within one year after the 

cause of action arises, and Buyer expressly waives any longer statute of limitations. 
It shall be an express condition to Industrial Scientific’s warranty that all products be carefully inspected for 

damage by Buyer upon receipt, be properly calibrated for Buyer’s particular use, and be used, repaired, and 

maintained in strict accordance with the instructions set forth in Industrial Scientific’s product literature. Repair 

or maintenance by non-qualified personnel will invalidate the warranty, as will the use of non-approved 

consumables or spare parts. As with any other sophisticated product, it is essential and a condition of 

Industrial Scientific’s warranty that all personnel using the products be fully acquainted with their use, 

capabilities and limitations as set forth in the applicable product literature. 
Buyer acknowledges that it alone has determined the intended purpose and suitability of the goods purchased. 

It is expressly agreed by the parties that any technical or other advice given by Industrial Scientific with respect 

to the use of the goods or services is given without charge and at Buyer’s risk; therefore, Industrial Scientific 

assumes no obligations or liability for the advice given or results obtained. 

Содержание Ventis 17154524-1


















Отзывы: