Industrial Scientific TANGO TX2, Руководство по эксплуатации продукта

Страница: 9 / 48

2
Getting Started
Gas Monitoring and Sensors
User Interface (UI)
Preparing the Tango TX2 for First Use
Gas Monitoring and Sensors
Measuring gas at two-second intervals, the Tango® TX2 is a portable, two-gas diffusion monitor
(instrument) for personal protection. See
“Instrument specifications”.
Tango TX2 is compatible with the Industrial Scientific sensors listed below and supports only a two-sensor
configuration. The instrument does not support a single-sensor configuration.
Sensors are customer replaceable. To install new or replacement sensors, see
“
Sensor replacement
”.
Table 2.1 Compatible gas sensors
Gas sensor Display screen
symbol
Part number Details
Carbon Monoxide (CO) 17160204
specifications
Carbon Monoxide with low Hydrogen cross-
sensitivity (CO/H
2
Low)
17160208
specifications
Hydrogen Sulfide (H
2
S) 17160207
specifications
Nitrogen Dioxide (NO
2
) 17160205
specifications
Sulfur Dioxide (SO
2
) 17160206
specifications
Data are saved every ten seconds and stored to the instrument data log. The data log has these
characteristics:
•
Capacity for approximately three months of data for a unit that is on 24 hours a day.
•
Date- and time-stamped entries for 60 alarm events, 30 error events, and up to 250 manual calibration
procedures and bump tests.
•
As new data are logged to memory, the oldest data are overwritten.
•
Downloaded on docking in a compatible docking station from Industrial Scientific.
User Interface (UI)
As illustrated below, Tango TX2 UI comprises instrument buttons, lights, sounds, and vibration along with
display-screen characters and symbols. The home-screen illustration indicates how gas readings generally