Indian Motorcycle SCOUT BOBBER 2021, Руководство пользователя

Страница: 50 / 162

4. If the fluid level is low, inspect brake pads as outlined in the
Brake Disc Inspection/Cleaning section. If pads are not worn
beyond the service limit, inspect the brake system for leaks.
Check for signs of brake fluid leaks around hoses, fittings,
reservoir, and brake calipers.
5. Add brake fluid if necessary. See page 92.
FFRROONNTT BBRRAAKKEE LLEEVVEERR
1. Pull the front brake lever toward the handlebar and hold it. The
lever should move freely and smoothly. The lever should feel
firm and continue to feel firm until released.
2. Release the lever. It should return to its rest position quickly
when released.
3. If the front brake lever fails to perform as stated, service the
brake lever before riding.
RREEAARR BBRRAAKKEE PPEEDDAALL
1. Press downward on the rear brake pedal. It should move freely
and smoothly. The pedal should feel firm and continue to feel
firm until released.
2. Release the pedal. It should return to its rest position quickly
when released.
3. If the rear brake pedal fails to perform as stated or travels too
far before beginning to engage the brake, service the brakes
before riding.
RREEAARR BBRRAAKKEE FFLLUUIIDD LLEEVVEELL
The rear brake fluid reservoir is located near the rear brake pedal.
View the reservoir level from the right side of the vehicle.
1. Position the motorcycle on level ground in the fully upright
position.
2. View the brake fluid through the reservoir
q
.
3. The fluid should be clear. Replace cloudy or contaminated
fluid.
4. The fluid level should be above the minimum indicator mark on
the reservoir body. Add brake fluid as needed. See page 90.
48
PRE-RIDE INSPECTIONS