Indian Motorcycle SCOUT BOBBER 2021, Руководство пользователя

Страница: 36 / 162

DDIISSPPLLAAYY UUNNIITTSS ((SSTTAANNDDAARRDD//M MEETTRRIICC))
The display can be changed to display either standard or metric
units of measurement.
STANDARD
DISPLAY
METRIC DISPLAY
Distance Miles Kilometers
Temperature
Fahrenheit Celsius
Time 12-Hour Clock 24-Hour Clock
1. Turn the ignition off.
2. Wait 10 seconds.
3. Press and hold the right-hand trigger switch while turning the
key to the ON or PARK position.
4. When the display flashes the distance setting, tap the right-
hand trigger switch to advance to the desired setting.
5. Press and hold the right-hand trigger switch to save the setting
and advance to the next display option.
6. Repeat the procedure to change remaining display settings.
CCLLOOCCKK
NOTICE
The clock must be reset any time the battery has been
disconnected or discharged.
1. Use the right-hand trigger switch to toggle to the odometer
display.
2. Press and hold the right-hand trigger switch until the hour
segment flashes. Release the switch.
3. With the segment flashing, tap the right-hand trigger switch to
advance to the desired setting.
4. Press and hold the right-hand trigger switch until the next
segment flashes. Release the switch.
5. Repeat steps 3–4 twice to set the 10-minute and 1-minute
segments. After completing the 1-minute segment, step 4 will
save the new settings and exit the clock mode.
EENNGGIINNEE EERRRROORR CCOODDEESS
The error screen displays only when the CHECK ENGINE light is
on or when it goes on and off during one ignition cycle. Error
codes display only during the current ignition cycle. When the
ignition switch is turned OFF, the code and message is lost, but will
reappear if the fault reoccurs after restarting the engine.
If the CHECK ENGINE indicator lamp illuminates, retrieve the
error codes from the display.
34
FEATURES AND CONTROLS