Indian Motorcycle SCOUT BOBBER 2021, Руководство пользователя

Страница: 103 / 162

HHEEAADDLLIIGGHHTT
HHEEAADDLLIIGGHHTT AAIIM M IINNSSPPEECCTTIIOONN
On LOW beam, the horizontal cut-off of the light beam
q
should
be 4 in. (10 cm) lower than the center of the headlamp bulb and
centered straight ahead at 32 ft. 10 in. (10 m).
1. Verify that tire pressure is at specification. See the Tire Pressure
section for details.
2. Verify that rear suspension ride height (preload) is at
specification. See the Rear Shock Preload (Ride Height)
Inspection section for details.
3. Position the motorcycle on a level surface with the headlight 32
ft. 10 in. (10 m) from a wall.
4. With the operator and passenger (if applicable) on board,
bring the motorcycle to the fully upright position.
5. Start the engine and switch the headlamp to low beam.
Observe the headlight aim on the wall.
6. Make any necessary adjustments to headlight aim.
NUMBER DESCRIPTION
q 4 in (10 cm) to top cut-off of beam
w
Measure distance = 32 ft 10 in (10.0 m)
e Headlight Center
101
MAINTENANCE