12
Operating instructions
1. Introduction
Read through these operating instructions as well as the operating
instructions of the set fully and carefully. The operating instructions
belong to this product and contain important points concerning
bringing the appliance into service and its operation.
Always pay attention to all safety instructions. Should you have any
questions or be unsure about operating the appliance ask a specialist.
Keep these instructions in a safe place and should the need arise pass
them on to a third party.
2. Proper use
When the bell button on the door intercom is pressed, it rings on the
intercom itself and on the mobile unit (ring duration and volume of the
door intercom can be changed).
A colour picture will be displayed. When it is dark, the white LEDs built
into the intercom are activated to illuminate the face of the person in
front of the camera and the image appears in colour. Additional
lighting can be installed to improve the picture quality at low ambient
light levels.
The video and audio transmission is wireless using a frequency of
2.4 GHz.
The following devices can also be connected to the intercom if required:
#
an electric door release* that can be unlocked from the mobile unit
#
a signal generator* (e.g. a bell or a flashing light) that is triggered
when the doorbell button is pressed (DVT/2 SET: when the upper
doorbell button is pressed)
#
a button to activate a connected door release
* separate power supply required
The outdoor station is for surface mounting and is weatherproof
(Protection class IP55), it can be mounted in a location outdoors which
is sheltered from direct rainfall. The charging station with power supply
unit and the mobile unit must be protected against moisture.
The door intercom can be operated either with 2x LR14(C) batteries or
with a 9-12 V DC power adapter (neither supplied).
Any other use or modification of the device is not authorised. No
liability will be accepted for consequential damages or for damages
caused by improper use or incorrect operation. No liability will be
accepted for consequential damages caused by any function or by
malfunction. Unless any liability is specifically required by law, claims
for damages, in particular those for personal injury or property damage
caused by non-functioning or malfunctioning of the machine, are
excluded.
This appliance is not intended to be used by people (including children)
with restricted physical, sensory or mental capacities, or a lack of
The additional outdoor stationDVT50T can be used to extend the
DVT50 SET or the
. The additional outdoor station
DVT50T2 can be used to extend the DVT50/2 SET.
DVT50/2 SET
experience and/or knowledge, unless they are supervised by, or
receive instructions how to use the appliance from a person
responsible for their safety.
3. Package contents (s. fig. A)
!
Outdoor station
!
Protective cover including torx screw and torx screwdriver
!
Fixing material
!
User manual
4. Features and Equipment
18 Speaker
19 Name plate
20 Outdoor station
21 Microphone
22 White LEDs
23 Lens
24 Light for ring button (flashes on pressing the ring button and
throughout any conversation)
25 Doorbell button
26 Connections
Taster für TÖ/GND Connection for an optional external
button to release the
door
DC 9-12V / GND
Power connection
NO/COM
Terminals for controlling an optional
door release
27 Pairing button
28 Hole for screw
29 Lugs for locking into the protective cover
30 Battery compartment cover
31 Wires for controlling an optional external signal generator
(DVT50T2: reacts to pressing the upper doorbell button)
Accessories (see Fig. A)
17 Mains adapter for charging station
32 Protective cover
33 Hole for security screw
34 Magnet for tamper alarm
35 Opening for connecting wires
36 Fixing hole
37 Screw
38 Screw
39 Plug
40 Cover for connection compartment
41 Screwdriver
42 Security screws
GB
