SmartNode SN1200 Hardware Description
17
Caution:
In this case the existing IP SW configuration is lost.
•
Boot loader:
Powering the SmartNode while pressing the reset button
for 5 seconds will cause the factory-fitted boot loader to start in place of
the application. The boot loader uses a minimal set of parameters. In
case the application does not start correctly, the boot loader can be used
as a fallback to download a new software version.
100 - 240VAC
50/60 Hz
Electricity supply socket for mains power cable.
Table 1-2: SmartNode SN1200 Reset Button and Power Line Socket on Rear Panel
Hardware Installation Guide, Revision 3.11
