Visit www.improvedracing.com for additional support
3
WARNING: Running the engine with cooler ports capped on ENV-170
will block oil flow and result in catastrophic engine damage.
Loop the lines together to connect the fluid paths if removing the heat
exchanger.
WARNING: This product should only be installed by a qualified me
-
chanic. Improper installation could result in severe engine damage.
WARNING: Never secure hoses to moving components.
Use zip-ties and P-clamps to ensure no hoses pinch / rub on the exhaust,
engine, suspension components and chassis.
Ensure heat exchangers are isolated from vibration.
Pre-fill heat exchangers to prevent dry startup.
Lubricate all 37° flares on the adapter fittings before final tightening.
Wrap tapered pipe (NPT) threads with Teflon (PTFE) tape or apply thread
sealant to seal the threads.
Lubricate O-rings on adapter fittings prior to installation to prevent
damage and ensure a leak-free seal.
Use aluminum tools to avoid damaging the aluminum fittings.
Properly clean all fasteners with acetone before using any thread lock.
Use isopropyl alcohol (90%+) to activate thread lock.