13
Visit www.improvedracing.com for additional support
13.
Apply oil to the adapter fitting’s flare on the OUT port of EGM-114, and
connect the straight hose-end of E5G-600-51. Torque the hose-end to
20 lb-ft (27 N-m).
14. Repeat Step 13 of this section with E5G-600-50 for the IN port on EGM-
114. Torque the hose-end to 20 lb-ft (27 N-m).
Tip:
Connect the 90° hose-end with heat shield at the adapter side.
15. Arrange HSC-1052, HWA-1003 and CP-16 from the E5G-600-62 Hard-
ware Kit as shown in Figure 14, then secure the hoses to the chassis loca-
tion circled in
green
on Figure 15.
Tip:
Use channel-lock pliers to keep the hose clamp straight while tight-
ening the screw.
CHASSIS
REAR
FRONT
DRIVER
PASSENGER
E5G-600-50
E5G-600-51
Figure 14 - E5G-600-62 Hardware Pack Arrangement
Figure 15 - Chassis Location for Rear Hose Clamp
