11
Visit www.improvedracing.com for additional support
INSTALLING THE IMPROVED RACING KIT
1. Familiarize oneself with EGM-114 and MHX-245 by reading the in-
cluded manuals.
2.
Install the adapter fittings into EGM-114. Torque the fittings to 20 lb-ft
(27 N-m).
3. Install EGM-114 using a 5 mm hex-drive tool.
Tip:
Cut a 5 mm key on the short side to make a low profile tool should
your headers interfere.
4. Use E5G-600-60 and E5G-600-61 Hardware Kits to secure the top and
bottom brackets to MHX-245, as shown in Figure 11.
5. Use a 12 mm tool and two HSC-1041 screws from the E5G-600-60
Hardware Kit to secure the top bracket to the vehicle using the two holes
circled in
green
on Figure 12.
Tip:
If the nut’s threads are filled with paint, run the provided M8 screws
through the hole(s) one to three times to clear the threads.
Figure 12 - Securing the MHX-245 & Brackets to the Car
Figure 11 - Brackets Attached to MHX-245
