IMPEY SHOWERS LTD
Conquest Business Park, Ilton, Somerset, TA19 9EA
Tel: 01460 256080 • Fax: 01460 259800
CARE AND MAINTENANCE
IMPORTANT:
When silicone sealant is used you must not use or work on
the panel/s for 24 hours after installation.
DO NOT
use bleach, scouring powders, solvents or other aggressive
cleaning agents.
To clean use warm soapy water and a clean cloth and rinse off.
Periodically check all fixings and tighten if necessary.
Please note: There has been a glass coating applied to this product,
use a squeegee to remove water and debris.
RECYCLING
Packaging:-
The cardboard and polythene parts of this packaging
can be recycled.
End of life:-
This product contains materials such as aluminium and
glass which can be recycled.
Please contact your local authority to find your nearest recycling centre.
TECHNICAL HELPLINE: 01460 258682
PAGE 20
10
Seal along the bottom of both sides of the glass, outside of the bottom of the wall channel,
50mm up the wall channel and the joint between the wall channel and panel.
Optional foot
- apply silicone sealant along the bottom of the
optional foot
, as shown.
Outside of foot
Inside of foot
Carefully push the panel back into the wall
channel (
1
). Slide the panel down the wall
channel and into the foot (
2
).
Reattach the tie bar.
Option B -
continued
1
2
2
1
Inside
From inside, if required adjust the height of the foot (
1
) so that the panel
is vertical. slide the spacer plate (PN80583) down between
the bracket and glass panel.
Tighten the grub screw (
2
) onto the panel.
Push fit the screw cover
caps.
3mm
PN80583
