CHEETAH 3G-SDI Camera
November 16, 2017
Page
18
of
53
Rev 1.1
3 Configuration Software
3.1 Overview
The Cheetah Pregius CamConfig software ships with the 3G-SDI camera. After
installing the software, you can program the camera, change its settings, and
save the settings in a file or in the camera using the RS-232 interface. The
software provides a help file to assist in setting up the camera.
The CamConfig software is compatible with the following operating systems:
•
Windows 7, 32-bit and 64-bit
•
Windows 8 and 8.1, 32-bit and 64-bit
•
Windows 10, 32-bit and 64-bit
3.2 Installing the Software
Use the installation wizard to install the Cheetah Pregius CamConfig software
supplied with your 3G-SDI camera.
If a previous version of the Cheetah Pregius GUI software is installed on your
computer, you must remove it before completing the installation. The
installation wizard will do this for you during the installation process. Or, you can
uninstall a previous version yourself.
To remove previous versions yourself:
1.
Open
Control Panel
on your computer.
2.
Select
Programs and Features
.
3.
Select the software from the list.
4.
Click
Uninstall
.
Installation
1.
Locate the executable file
(
Cheetah_Pregius_1_0_5_xxxx.exe)
on the media that
shipped with your camera.
2.
Drag the file to your computer desktop. If a Security screen appears,
click
OK
.
