Page
59 of 65
SDI Connector
The SDI connector is a 75 ohm, right angle, coax BNC jack.
The manufacturer is Trompeter Electronics, part number UCBBJR29.
ExpressCard Connector
( VCE-HDEX02/HDEX03 only )
The ExpressCard connector is a surface mount, right angle, 26 position,
female connector.
Pin #
Signal name
In/Out
Note
1
GND
2
USBD-
I/O
not used
3
USBD+
I/O
not used
4
CPUSB#
O
not used
5
reserved
6
reserved
7
SMBCLK
I/O
not used
8
SMBDATA
I/O
not used
9
+1.5V
10
+1.5V
11
WAKE#
O
3
12
3.3VAUX
5
13
PERST#
I
4
14
+3.3V
15
+3.3V
16
CLKREQ#
O
2
17
CPPE#
O
1
18
REFCLK-
I
19
I
20
GND
21
PERn0
O
22
PERp0
O
23
GND
24
PETn0
I
25
PETp0
I
26
GND
Table 6 – ExpressCard Connector Pin-out
Notes:
1 –
CPPE# indicates to the host that the card has been inserted.
2 –
CLKREQ# indicates to the host that the card is requesting that the REFCLK be provided. This is a
Power Management function and is not implemented on the HD-SDI Express.
3 –
WAKE# is used to notify the host that it should re-apply power to the card. This is a Power
Management function and is not implemented on the HD-SDI Express.
4 –
PERST# is a reset signal driven by the host to reset the card.
5 –
3.3VAUX is used to power the WAKE# circuitry. This is a Power Management function and is
not implemented on the HD-SDI Express.
