Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: [email protected]
9
iMode Digital Loudspeaker Processor
iP24
COMPUTER, iPAD® AND iPHONE® CONNECTION
The connection to the
must be made through
computer
an
ethernet
CAT
network, using standard
5 network cables.
The connection to the iPad
iPhone
®,
® or computer with wifi
requires the construction of a wireless network. Therefore it
will be necessary to use a wireless router (not included), that
can also work as a DHCP server (see the “Network setup”
paragraph for more information).
The ethernet cable from the computer or the access point has
to be plugged into the connector called
of the iP24.
“PORT 1”
The other iP24 can be connected directly to the access point
(using an other available LAN port) or can be daisy chained from
the first iP24. In this case a network cable has to be plugged
from
2 of the first device to the
of the next
“PORT ”
“PORT 1”
iP24.
SOFTWARE
In case of use with a personal computer, no special software is
required, but just a web browser that supports Java®
applications. In order to communicate with a single iP24, start
the web browser and write the device’s IP address in the
address bar. The Java application will start automatically.
Using this application it will be possible to control all the
parameters of the single device, but not the groups.
The application called “iP24 for iPad® is available on the App
”
Store. Through this application is possible to monitor and
control each single device and groups of iP24. It is possible to
save and share, via e-mail, all the parameters of all the devices
in the project, as well as to work in offline mode.
NETWORK SETUP
Outline iP24 uses the TCP and UDP, according to standard RFC
768.
All the devices (processors, computer, iPad® and router)
connected to the same local network communicate via IP
addresses. The basic rules of this addressing mode are
presented here:
Ÿ
each device must have an assigned IP address;
Ÿ
the IP addresses must be unique (no duplicates);
Ÿ
all the IP addresses have to belong to the same subnet.
I.e if the loudspeaker has the following network settings:
IP
:
192.168.1.34
address
SUBNET MASK:
255.255.255.0
In order to have the communication with the computer, the
iPad® or the router, the latter must have a different IP address
belonging to the same subnet. In this case, one possible
network address for computer is:
IP
:
192.168.1.10
address
SUBNET MASK:
255.255.255.0
The IP addresses can be assigned manually or automatically
(DHCP).The iP24 are supplied, as standard, with the DHCP
option enabled.
DHCP means "Dynamic Host Configuration Protocol". If this
option is enabled, the devices are waiting for a valid IP address
from a DHCP server (usually implemented in any wireless
router) for about one minute. It is strongly suggested to switch
on the router before any device.
COLLEGAMENTO CON IL COMPUTER O iPAD®/iPHONE®
Il collegamento con il computer deve essere effettuato
mediante la rete
utilizzando cavi di rete CAT 5.
ethernet,
Il collegamento ad un iPad®, iPhone® o computer con wifi
avviene tramite la costruzione di una rete wireless. Sarà quindi
indispensabile utilizzare un router wireless (non fornito), che
sia in grado di funzionare anche come DHCP server (vedi il
paragrafo “Configurazione della rete”).
Il cavo proveniente dal computer o dall’access point deve
essere collegato al connettore ethernet chiamato “PORT 1”
del iP24. I successivi iP24 possono essere collegati
l’
direttamente all’access point (utilizzando una delle porte LAN
disponibili) oppure in successione al primo iP24. In questo caso
collegare un cavo dal connettore “PORT 2” del primo iP24 al
connettore “PORT 1” del successivo.
SOFTWARE
Nel caso di utilizzo con personal computer non è necessario
installare alcun software. E’ sufficiente utilizzare un comune
web browser che supporti le applicazioni Java®. Per
comunicare con
singolo
aprire il web browser e digitare
un
iP24
l’inidirizzo IP
nella barra degli indirizzi.
del dispositivo
Comparirà automaticamente l’applicazione Java, tramite la
quale è possibile controllare tutti i parametri inerenti alla
singola macchina, ma non ai gruppi.
Sull’Apple Store è disponibile l’applicazione “iP24" per iPad®.
Questa consente il monitoraggio, il controllo contemporaneo e
la gestione a gruppi di più iP24. È possibile memorizzare e
condividere, tramite e-mail, i parametri di più macchine, così
come realizzare progetti off-line.
CONFIGURAZIONE DELLA RETE
I processori iP24 utilizzano un protocollo di rete di tipo TCP e
UDP, conforme allo standard RFC 768.
Tutti i dispositivi (processori, computer, iPad® e router)
connessi in una rete locale comunicano tramite indirizzi IP.
Perchè tutto funzioni é necessario che:
Ÿ
a ciascun dispositivo sia assegnato un indirizzo IP;
Ÿ
non esistano indirizzi IP duplicati;
Ÿ
tutti gli indirizzi IP appartengano alla stessa sottorete.
Ad esempio, se il dispositivo ha le seguenti impostazioni di
rete:
Indirizzo IP:
192.168.1.34
SUBNET MASK:
255.255.255.0
Per far sì che ci sia comunicazione con il computer
o il
, l’iPad®
router, è necessario che quest’ultimo abbia un indirizzo IP
diverso, ma che appartenga alla stessa sottorete. In base
all’esempio proposto una possibile configurazione di rete per il
computer é la seguente:
Indirizzo IP:
192.168.1.10
SUBNET MASK:
255.255.255.0
Questi indirizzi IP possono essere assegnati manualmente o
automaticamente (DHCP). I processori iP24 vengono forniti, di
fabbrica, con l'opzione DHCP abilitata.
DHCP significa "Dynamic Host Configuration Protocol". Con
questa opzione abilitata i dispositivi attendono l'assegnazione
di un indirizzo IP valido da un server DHCP (di solito
implementato in
router wireless) per circa un minuto.
ogni
È
consigliato accendere il router prima di ogni dispositivo.
COMUNICAZIONE CON IL DISPOSITIVO / COMMUNICATION WITH THE DEVICE