Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: [email protected]
10
Delivering the True Audio Experiences
RISOLUZIONE PROBLEMI
Nel caso in cui non si disponga di un DHCP server o non si
conosca l’indirizzo IP assegnato manualmente al
è
l’unità iP24
possibile ripristinare l’indirizzo di default (192.168.1.34)
accendendo il sistema tenendo premuto il tasto “Home”.
L’indirizzo così ripristinato rimane attivo solo fino allo
spegnimento dell’apparecchio, ma può essere modificato da
software.
In questo caso è possibile comunicare con
,
il processore
connettendol direttamente al computer con un normale cavo
o
di rete CAT5. Il computer deve avere un indirizzo IP manuale
che rispetti le regole descritte al paragrafo “Configurazione
della rete” (ad esempio: 192.168.1.10).
INDICAZIONI PER LA RETE WIRELESS
Il router wireless deve avere le seguenti caratterisitche:
Ÿ
almeno una porta LAN per la connessione con gli iP24;
Ÿ
DHCP server abilitato;
Ÿ
rete wireless abilitata (per la comunicazione con iPad®,
iPhone® e computer wireless).
Si consiglia, dal primo uso, di cambiare la password di
amministratore del router, modificare il nome della rete
wireless e selezionare una password di accesso (WPA2). Queste
informazioni dovranno essere salvate, in quanto saranno utili
per l’accesso alla rete e per impostare il router. Il computer e
l’iPad® che saranno utilizzati per il controllo devono rispettare
le regole di comunicazione di rete, quindi si consiglia di
impostarli in modalità DHCP (ottieni automaticamente
indirizzo IP).
Le capacità di controllo tramite dispositivi senza cavo
dipendono drasticamente da numerosi fattori, quali il
posizionamento dell’antenna e l’interferenza con altre reti
wireless. Nello specifico si consiglia di:
Ÿ
posizionare l’access point in modo tale che l’antenna sia
visibile e lontana da ostacoli;
Ÿ
se sono attive altri network (come in fiere, grandi strutture
o luoghi affollati) usare reti wireless a 5 GHz (non
supportato da iPhone®).
Per avere un controllo migliore sulle prestazioni della rete
senza fili, molti analizzatori wifi per computer, tablet e
telefoni sono disponibili sul web.
TROUBLESHOOTING
If the DHCP is not available or if you do not know the IP address
manually assigned to the iP24 unit, you can restore the default
address (192.168.1.34) by switching on the system holding
down the
button. The restored default address is
“Home”
active only up to the shutdown of the system, but can be
modified by software.
In this case it is possible to communicate with the device,
connecting it directly to a computer via a CAT5 network cable.
The computer must have a manual IP address that respects the
rules described in the “Network Setup” paragraph (i.e.
192.168.1.10).
WIRELESS ROUTER BASIC SETTINGS
The minimum wireless router set-up requires:
Ÿ
at least one LAN port for connection to the iMode device;
Ÿ
DHCP server enabled;
Ÿ
wireless Network enabled (for the communication with
iPad®, iPhone® and wireless computers).
It is strongly suggested, from the first use, to change the router
administrator password and to modify the wireless name and
choose a security password (WPA2). Please store these data,
they will be useful in the future both to access to the net and to
set it up. The Computer and the iPad® running the control
application have to respect the network communication rules,
so it is suggested to set them as DHCP (Automatic IP) mode.
The ability to control via wireless device dramatically depends
on many factors, such as the position of the wireless antenna
and interferences with other wireless networks. Specifically,
we recommend to:
Ÿ
place the access point so that the antenna is visible and
away from obstacles;
Ÿ
if many networks are active in the same place (typical case
in trade fairs, large structures or crowded places) use a
5 GHz wireless (not supported by iPhone®)
To have a deeper control over the wireless performance, many
wifi analyzer for computers, tablets and phones are available
on the web.