IMKO SONO-DIS, Руководство пользователя

Страница: 13 / 60

13
1 General Settings
SONO-DIS provides diverse possibilities for different settings. By pressing of at least 2 seconds of the button
„Settings“ you reach the menu “Settings”. Select the desired function with the buttons „+“ or „-“ and
confirm it with the button .
Leave the menu item „Settings“ by pressing the button „Settings“ .
An Overview of the setting options
1.1 Detecting Sensor/Probe
In the event that communication problems arise with the probe at the activation of the SONO-DIS portable
measuring instrument, or if the probe was not connected, or it is intended to exchange the probe during operation,
this menu item should be selected. After selection of this menu item, the SONO-DIS will again attempt to establish
a connection to the connected probe. If this attempt is successful, the serial number of the probe will appear in
the display.
Should a connection not be possible, „No probe detected“ will be generated on the display.
NOTE:
Should no connection to the probe be possible in spite of several attempts, check if the probe is connected
properly. Should this not deliver a positive result, please contact our service department.
Settings Designation
HD2-Mode
Switching the Operating Mode
•
Normal“ → measurement of the variables Moisture, Temperature, and EC-TRIME
“Average Value“ → determination of the average value of up to 6 individual moisture
measurement values
•
„Water Calculation“ → Calculates the content of water of the material in l/m³
Material calibration
•
Choosing or change the Material Calibration
Detect Probe
A new search for a connected probe (if an error has occurred during the activation of
the device)
Language
Switching the System Language
•
German
•
English
Auto-Power-Off
Setting of the automatic shut-down
Display Lighting
Setting of the Background Lighting
•
Turn-Off-Time
•
Intensity
LCD-Contrast
Setting of the ideal contrast
Probe Info
Information regarding the probe
SONO-DIS Info
Information regarding the SONO-DIS handheld device