IMKO SONO-DIS, Руководство пользователя

Страница: 47 / 60

47
The selection of the background illumination,
respectively the time until the automatic shut-down
of it is selected via the button „Up“ by actuating it
several times.
Using the button „Down“
, is used to adjust the
intensity of the illumination, respectively turn the same
completely off.
Activate and store your settings by actuating the button
„Measurement“ .
After activation, the symbol will appear in the upper
right-hand corner of the display
1.12 Display Contrast
At extreme temperatures, it may be necessary to adjust the contrast of the display in order to be able to clearly
read the display. For this purpose, select the menu item „Display Contrast“.
Change the contrast by actuating the button „Up“ ,
respectively „Down“ .
Set the contrast that you can realize the whole graysca-
le on the diagram. Activate and store your settings by
actuating the button „Measurement“
.
After activation, the symbol will appear in the upper
right hand corner of the display.
1.13 Probe Info
By selecting this menu item, the display presents information regarding the connected probe.
These are:
•
Serial Number
•
Probe Type
•
Hardware Version (HW)
•
Firmware Version (FW)
1.14 SONO-DIS-Info
By selecting this menu “item”, the display presents information regarding the SONO-DIS handheld device.
These are:
•
Serial Number
•
Hardware Version (HW)
•
Firmware Version (FW)
•
Accumulator Capacity
•
Accumulator Voltage