IMKO SONO-DIS, Руководство пользователя

Страница: 41 / 60

41
1.6 Material Calibration
Depending on the task of the deployment, various calibrations are deposited in the probe. These can be volumetric
calibrations for grounds of various densities, gravimetric calibrations for the measurement of sand moisture
contents, or also running period calibrations.
You can select the calibration required for your application within the menu item „Material Calibration“. This
enables to cover a multitude of deployment options with merely one probe. Also it is possible to setup your own
calibration, to enable the measurement of special materials.
After the selection of the menu item „Material
Calibration“, you have to choose between “CHOOSE”, to
save one out of fifteen calibration as default calibration,
or “CHANGE”, to setup an individual new calibration in
one of the fifteen calibration storages.
1.7 Menu Item: “CHOOSE”:
The 15 calibration options are displayed by name. This requires a short moment of time. A display in a similar form
as follows will be presented:
The list can be scrolled and the desired calibration be
selected by actuating the buttons „Up“
and „Down“
.
The “!“ in front of a calibration indicates the currently
active one. You can set the selected calibration to become
the active one by actuating the button „Measurement“
.
After a short moment, the symbol will appear in
the upper right hand display corner to indicate that the
selection has been activated. In addition, the „!“ will be
placed in front of the now active calibration.
TIPP!
NOTE:
Get to this menu item directly out of the measurement screen, by actuating the button „Up“