IMI Pearlmax3, Руководство пользователя

Страница: 38 / 41

15.
15.
Trouble shooting
Trouble shooting
Before you call your service technician, please check with belows list if you can solve the problem
(some topics only refer to units with sodawater option)
Page 37
Description of failure Remedy
CO
2
Pressure is to low
CO
2
- Cylinder is empty
Mains water connection not opened
no electricity
Only CO
2
-Gas at the dispense nozzle
Mains water not connected or waterpressure to low
Stillwater flows to slow Mains water pressure is to low
Temperatur setting (under unit cover) is set to high
Ventilation grids covered or unit placed to close to a wall
Dispense rate exceeds the unit specification
Only version with inline carbonation technology -> open the drain connection (blue stop
cock) behind the servicedoor in order to drive out any possible water from the gas side of the
inline carbonation module (see page 38 of user manual)
CO2-pressure to low. Ask your service technician to readjust the CO
2
pressure.
CO
2
-cylinder almost empty
Only version with inline carbonation technology -> mains water pressure is to low (min. 2,5
bar dynamic pressure). Ask your service technician to build in the optional available booster
pump.
Drinktemperature set to high (the lower the temp., the better the CO
2
saturation)
Dispense rate exceeds the unit specification
Beverage is to warm
No water dispensable
CO
2
-LED is illuminated and only Stillwater is
available
CO
2
- volume in the water line is to low
(Should be : ~3,0 Vol. / ~6,0g per Litre)
Unit only dispenses stillwater
CO
2
cylinder empty