IMG BRASIL BIMG METVISA FTE.150 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 40

IMG BRASIL BIMG METVISA FTE.150 Скачать руководство пользователя страница 23

27

Equipment with smell of
burning or smoke.

Voltage different from mains
voltage.

Send the equipment to the nearest authorized service
station or contact the factory.

Miscellaneous electrical problems.

Burned food

Very high temperature and or baking time.

Failure to cure the paint inside
the oven.

For the first use of the equipment it is necessary to
cure the paint inside the oven (chamber). Follow the
instructions in item 4.3 (Operating Procedures).

Time to warm up or
return to temperature.

Incorrect adjustments to the controller.

Make the controller adjustments as instructed in item
4.3 (Operating Procedures).

Dirty oven.

Clean the oven according to the instructions in item
5.1 (Cleaning Procedures).

Overloading.

Charge the oven, respecting the spaces available on
the racks.

Miscellaneous

electrical

problems (motor / capacitor,
contactor,

wiring,

fuse,

electric switch, power cable,
buttons and burned resistor).

Send the equipment to the nearest authorized
service station or contact the factory.

Uniform baking

Temperature too high, or too low.

Make adjustments to the controller according to the
instruction manual.

Fan out of position.

Send the equipment to the nearest authorized
service station or contact the factory.

Overloading.

Charge the oven, respecting the spaces available on
the racks.

Oven giving shock

Lack of grounding.

Follow the instructions in item 3.3 (Electrical Connection).

Miscellaneous electrical problems
(motor / capacitor, contactor, wiring,
fuse, electric switch, power cable,
buttons and burned resistor).

Send the equipment to the nearest authorized service
station or contact the factory.

For more information and clarification, contact your nearest Authorized Service Center. See

technical assistance on our website:

www.metvisa.com.br

7. Appliance Life and Components

The life of the equipment can vary from 3 to 5 years depending on the proper use, cleaning,

maintenance and quality of its components.

The following is the useful life relationship of the major components:

•

On / Off button: 10000 maneuvers;

•

Power button Light: 10000 maneuvers;

•

Cables and wires: 25 years;

•

Electrical terminals: 8 years.

«
...
21
22
23
24
25
...
»

Содержание BIMG METVISA FTE.150









































Отзывы:

Нет отзывов