IMG BRASIL BIMG METVISA FTE.150 Скачать руководство пользователя страница 19 | Manualshive

Страница: 19 / 40

IMG BRASIL BIMG METVISA FTE.150 Скачать руководство пользователя страница 19

19

ATTENTION!

The Oven leaves the factory with temperature programmed at 200° C and cooking time 60 minutes. Due
to this programming, as soon as the on / off button is pressed the oven starts the heating and rotation
of the turbine.

To reprogram the cooking temperature and time, follow the instructions below.

3. Start the oven programming by pressing the programming access key

;

4. Enter the desired temperature using the up and down keys. The selected value will

appear on the temperature display.

5. To confirm the temperature press the key

;

ATTENTION!

For your safety and not to compromise the life of the equipment, the maximum temperature supported
by the oven is up to 250° C.

Failure to observe this guideline will be considered as unsafe act and abusive use of equipment.

6. After confirming the temperature, the time display will be available for programming. Enter the

desired cooking time in minutes using the up and down keys;

7. To confirm the time press the key

;

8. After the oven reaches the desired temperature, open the oven door. At this point it will

automatically switch off the fan and the oven heating due to a safety system;

Only with the door open is possible switched off the turbine with the oven switched on.

9. Place the p er fo ra te d racks (dimensions 580 x 700 mm) inside the oven. As soon as you close

the door, the fan and the heating will switch on automatically without the need to reprogram the
temperature and the time. Make sure the door is firmly closed by turning the knob to the limit of
its stroke;

to activate the preprogrammed cooking time count as instructed from

10. Press the timer button

item 6;

11. After the heating reaches 100°C, the use of the steam function is released. If necessary, press the

key for manual steam or for cyclic steam according to your recipe;

12. At the end of the set time, a beep sounds. To turn the beep off, press the button

;

13. Open the door and remove the racks. To insert more racks using the same temperature and

time, repeat the instructions from item 9. If the food to be roasted needs reprogramming of
temperature and time, follow the instructions from item 3;

«
...
17
18
19
20
21
...
»

Содержание BIMG METVISA FTE.150









































Отзывы:

Нет отзывов