IMG BRASIL BIMG METVISA FTE.150, Инструкция по эксплуатации, Страница: 17 / 40

17
1 - Display that indicates the temperature present in the temperature sensor or the programmed
temperature;
2 - Display indicating elapsed time or programmed time;
3 - Led timer indicator;
4 - Timer key: activates or cancels the timer;
5 - Steam output indicator light on;
6 -
Single steam time trigger button. At each touch the steam output is activated for a
preset time (factory setting is 6 seconds). To reprogram the cyclic steam, follow the
instructions below;
7 - Led indicating whether the fan is energized;
8 - Up key: increases the programmed value and activates the fan;
9 - Led indicating cyclic steam enabled;
10 - Down key: decreases the programmed value and selects the cyclic steam function,
which emits steam automatically for 6 seconds and every 2 minutes (factory default program). To
reprogram the cyclic steam, follow the instructions below;
11 -
Programming access key;
12 - Heating indicator LED on;
Reprogramming of single steam and cyclic steam:
To reprogram the steam time press the keys at the same time, in that moment
it will appear in the display . Set the the steam time through the keys . Press the button
to confirm the simple steam program.
Reprogram the cyclic steam by pressing the button , the led will light up. After that,
press the keys at the same time and the display will appear . Set the steam exit
time with the keys and confirm that it will also activate the time option for each steam
cycle . After setting the interval time between each cycle, confirm with .