28/11/02-\\SERVER\TECNICO\-SNZ\0Sit\hVtf500shie.doc-Scheda Identificazione Codice Padre (mac.sott.etc...)-
7 di 62 pagine.
Pagina
n°-
7
63GA
MOVING AND TRANSIT
In case the machine is in a protection cage ,a fter unpacking , unscrew the screws that jut out from the low
side of the 4 little supporting feet-pos.1/dr.RI0102 ( they serve to avoid the sliding of the machine during the
transit ).
Use the 4 plates fixed to the angles of the base to hook the ends of the tools suitable to sling the
machine.The weight is shown on the identification number plate and is also reported in the technical data of
the manual.
Make sure that lifting tools are proper for the weight and that the moving is correctly made without
unbalancing the machine.
Please ONLY USE the fastening points placed on the floor stand , do not hook the saw frame or the work
table.