
28/11/02-\\SERVER\TECNICO\-SNZ\0Sit\hVtf500shie.doc-Scheda Identificazione Codice Padre (mac.sott.etc...)-
5 di 62 pagine.
Pagina
n°-
5
63 FB ( FOR SEMIAUTOMATIC MACHINES )
INSTRUCTIONS FOR USE - SUGGESTIONS FOR THE OWNER AND THE OPERATOR
This machine is designed and manufactured so as to be safely used by the operator, provided that it is
properly operated . No protections will ever suffice if the operator does not work with due caution, does not
make sure that the machine is in top operating conditions and does not follow the instructions below.
The machine can make some automatic work cycles, but at the end of each one the operator is necessary
to replace the cut workpiece and to change the cutting conditions. Therefore sometimes the machine must
be used with manual cycle and sometimes with automatic cycle ( so the operator is not indispensable ).
You must remember that the machine is designed to CUT METALS with a sharp tool, and you are
responsible to see that it is operated in a SAFE and CORRECT manner.
You must :
1. make sure that the machine is properly installed and electrical installation is proper.
2. be sure you are familiar with all operating, safety, and applications information before
operating this machine.
3. see that all who operate this machine are properly trained and fully aware of all safety
practices.
4. not expose yourself or other people to any risk.
5. insist on proper personal protective equipment and practices.
6. maintain all factory installed SAFETY DEVICES and make sure that these are never
removed or altered or restricted in any way.
7. insure that the operator has a safe and orderly work area with adequate light and operating
room.
8. be certain that your machinery receives responsible and competent maintenance and that
your machinery is inspected on a regular basis.
9. never mount tools with different features from those for which the machine is designed for.
10.never use this machine to cut workpieces larger than the stated capacity.
11.keep cutting area clear of tools or other loose objects.
12.never operate machine unless all guards are in place.
13.NEVER WEAR loose clothing, long sleeves, large gloves, jewellery, or any other
items that may be caught. Confine long hair.
14.always disconnect power at source when performing maintenance or making
adjustments.
15.never insert hands or arms into or near cutting area while machine is running.
16.properly clamp the workpiece in the vice and never hold it with your hands.
17.adequately support stock on both sides of the machine to prevent falling.
18.when cutting very short pieces, make sure they do not jam into the blade.
19.if the blade becomes jammed, turn immediately off the emergency locking button, then
replace the cutting unit on CUTTING START position. If it is not possible open the vice and move the
piece check that the blade or the teeth are not broken, if so replace it.
20 never change the working conditions during the cutting, change them for those precisely indicated only
( for example speed changing with inverter ESC ).
21.not move the machine while cutting and avoid its instability.
22. wear the personal safety equipment, if required for a safe operation.
ALWAYS OPERATE MACHINE SAFELY, USING COMMON SENSE AND ALERTNESS .