
28/11/02-\\SERVER\TECNICO\-SNZ\0Sit\hVtf500shie.doc-Scheda Identificazione Codice Padre (mac.sott.etc...)-
3 di 62 pagine.
Pagina
n°-
3
63 DE
1 - MACHINE DESCRIPTION, E.C. SAFETY NORMS, SUGGESTIONS FOR THE USE
Semiautomatic, electro-hydraulic band sawing machine with hydraulic movements. Suitable for cutting metal
profiles and solids from 45 deg. right to 45 deg.left.
It is not suitable to cut wood and assimilated materials ( cfr.D.M.89/392, enclosure I, paragraph 2.3
).
The automatic working cycle is usually consisting of : locking of the material, feeding and cutting, tool return
and unlocking of the material.
The operator must make the cutting adjustments , the displacement of the material and the starting. For
making oblique cuts it is also necessary to tilt manually the saw frame from 45 deg. right to 45 deg. left .
The applied safety norms are mentioned in the included compliance declaration.
From the position of the work, in front of the frontal vice, the operator has the possibility to actuate the
controls and to control the precision of the sawing .
In the following paragraphs you will find any informations to use the machine in the best way and for a very
long time.
The following picture sums up all indications necessary for the machine marking:
- identification plate, with the serial number, is fixed on the front right angle - pos. A ;
- the keyboard of the electronic control has a further register number placed on the back shield - pos. B ;
- each motor - pos. C and D, has its own serial number.
1.1 - APPENDIX FOR E.M.C.
The structure of this machine is complying to the protection requirements of the EEC Directives 89/336/EEC,
92/31/EEC and 93/68/EEC in terms of Electromagnetic Compatibility (E.M.C.).
In particular it respects the technical prescriptions of the norms EN 55011 and EN 50082-2, and it is
foreseen to be used in industrial enviroments and not in residential ones.